Defender 90/110 Handbrake Conversion Kit X-Eng

The kits use powerful calipers whose mechanism is sealed to prevent the access of mud. Parts are supplied coated with a tough corrosion resistant coating of gold zinc passivate to ensure a long life. Fitting is easy requiring only simple tools. Full fitting instructions are included as well as advice on adjustment and use.

The disc transmission brake uses a state of the art monster sized mechanical caliper designed for agricultural vehicles and earth moving equipment so using it on a Land Rover is easy work for it. The mechanism is sealed so it will not seize up due to ingress of mud or water and it uses special 'sintered' pads which are resistant to abrasion from mud as well as providing greater friction against the disc than a standard pad. The disc has been specially designed for Land Rovers and manufactured from tough 10mm thick steel. It has a smaller diameter than a standard drum and so does not dangle below the transfer box which helps to protect it from whatever you are driving over. The caliper mechanism sits in a well protected area at the top, away from most of the mud and water.

Note:

For anything post 1993 (300Tdi, Td5 & Puma) you need to change the cable - NRC5088. Puma onwards - modifications may be needed to the chassis to enable fitment.

Compatibility:

• Land Rover Defender 90/110