Range Rover Classic

A PAIR OF replacement front round wing mirrors complete with stalk, clamp and nut, fits either side. EQUIVALENT TO PART NUMBER(S): 562912 SUITABLE FOR THE FOLLOWING LAND ROVER MODELS:Series, All ModelsRange Rover Classic, All Models, 1971-1984

A replacement clutch release thrust bearing. It is always recommended to change the release bearing whenever the clutch is changed or worked on. A quality replacement part, equivalent to Land Rover Part number: FTC5200Suitable for the following...

A pair of replacement upper tailgate gas support struts. Quality replacement parts, equivalent to Land Rover part number: MXC7833Suitable for the following models: Land Rover: Range Rover Classic, All models, 1970-1995

A new, quality OEM branded replacement distributor rotor arm. A quality replacement part, equivalent to Land Rover part numbers: STC1857, RTC3340, RTC3199, RTC6629Suitable for the following models: Land Rover: Defender, 3.5/3.9 V8, 1987-2006, Carb EFi...

A pair of OEM prop-shaft universal joints to fit either end of the front or rear prop-shaft. IMPORTANT: These universal joints measure 75mm wide with 27mm diameter cups. See note below.EQUIVALENT TO LAND ROVER PART NUMBER(S): TVC100010, RTC3458,...

A pack of 10 black plastic, expanding rivets.Used for various applications on Land Rover models and may also be suitable for other makes of car. The rivets measure:Diameter 8mmLength 13mmHead diameter 12.5mmSuitable for fixing approx 4-7mm...

A special tool used to remove the alloy wheel locking wheel nut covers.The stainless steel covers are very difficult to remove without the special tool without damaging them. Simply push this tool over the nut cover and pull off.Can only be used on the...

Terrafirma rear upper A-frame suspension link chassis end bush (NTC1773). EQUIVALENT TO LAND ROVER PART NUMBER(S): NTC1773 PLACEMENT: Rear A pair of Terrafirma of uprated Poly Bushes for the Rear A-Frame Suspension link for the Land Rover Defender,...

A set of 8 exhaust manifold gaskets to fit the Rover 3.5 Litre V8 engine with carburettors (Not EFi)Quality replacement parts, equivalent to Land Rover part numbers: ERC3606 & AJM692Suitable for the following models: Land Rover: Defender, 3.5 V8...

An OEM prop-shaft universal joint to fit either end of the front or rear prop-shaft.IMPORTANT: These universal joints measure 75mm wide with 27mm diameter cups. See note below.EQUIVALENT TO LAND ROVER PART NUMBER(S): TVC100010, RTC3458,...

Terrafirma front radius arm bush kit axle end (NTC6781). PLACEMENT: Front A set of uprated Terrafirma polyurethane bushes for the front radius arm, axle end, for the Land Rover Defender and Range Rover Classic. These are for the arm to axle mounting...

A new replacement interior courtesy light door switch. A quality replacement part, equivalent to Land Rover part number: PRC8548Suitable for the following models:Land Rover: Defender, All models, REAR DOORLand Rover: Discovery 1, All models,...