Series 1,2 & 3

A 3 way brake pipe connector with metric 10mm threads. Suitable for brake pipes on Land Rover's and many other vehicles using standard M10 fittings. A quality replacement part, equivalent to Land Rover part number: NRC4251Suitable for the following...

A replacement left hand door seal. This is a 1 piece seal that replaces the earlier 3 part rivet in place type seals. EQUIVALENT TO PART NUMBER(S): LR044308, LR077686, CFE102991SUITABLE FOR THE FOLLOWING LAND ROVER MODELS:Series 3, Not rivet type...

A replacement right hand door seal. This is a 1 piece seal that replaces the earlier 3 part rivet in place type seals. EQUIVALENT TO PART NUMBER(S): LR044307, LR077687, CFE102981SUITABLE FOR THE FOLLOWING LAND ROVER MODELS:Series 3, Not rivet...

A replacement clutch release thrust bearing. It is always recommended to change the release bearing whenever the clutch is changed or worked on. A quality replacement part, equivalent to Land Rover Part number: FTC5200Suitable for the following models:...

Defender fuel injector. SUITABLE FOR THE FOLLOWING LAND ROVER MODELS: Defender, 1983-2006 EQUIVALENT TO LAND ROVER PART NUMBER(S): ERR1266 FUEL TYPE: Diesel Modern Land Rover engines have fuel injectors that spray fuel into the engine at extreme...

A complete brake overhaul kit consisting of shoes, springs, wheel cylinders and retaining screws. Kit is enough for a complete axle or both sides.Suitable for the following models: Land Rover: Series 2A, 3 SWB 88, All Models, Up To 1980, Rear

A complete front brake overhaul kit consisting of shoes, springs, wheel cylinders and retaining screws.The kit is enough for a complete axle or both sides. Suitable for the following Land Rover models:Series 2A, 3 SWB 88, Up To 1980, Front 10" Drums

A replacement rubber boot gaiter kit for the gear lever, transfer box lever and handbrake lever.SUITABLE FOR THE FOLLOWING LAND ROVER MODELS:Series 2A, 3, All Models

With this Techno trim Defender XS Style cubby box in your Land Rover, you can ensure your vehicle remains clutter-free with one of these handy storage boxes. Hand-built in the UK, these quality cubby boxes are suitable for all Land Rover Series 3 and...

A replacement light kit consisting of lamp bases with wiring and lamp lenses. The wiring will plug into the existing vehicles wiring on most pre 1993 models On some models the connectors may be different so a simple bit of DIY may be required. Supplied...

Specialist socket for prop shaft fasteners on most Land Rovers. The 9/16" socket end is a perfect hexagon with rounded tip profiles to ensure the whole turning power is transferred onto the flanks of the nuts instead of on the corners. The socket's slim...

A glow plug conversion kit to convert the old type glow plugs that are wired in series, to the newer type that are wired in parallel for better reliability and improved starting. This gets over the problem that when one glow plug fails it prevents all...