Workshop Consumables

Air Flow MAF Sensor Cleaner LIQUI MOLY 200Ml - 4066

Liqui Moly

Special active solvent for fast and gentle cleaning of sensitive components of the air flow sensor in petrol and diesel engines. The Cleaner also distinguishes itself by means of a very fast evaporation that is free of residues. A dirty hot wire or hot...

Assorted Heat Shrink Tube Kit 50mm lengths Qty 350 Electrical Insulation - 31893

Connect

Handy selection of electrical heat shrink tubing. Great for any electrical job, shrinks down to half the original size, waterproofing and insulating electrical connections. Shrink Ratio 2:1Black tubing. Sizes are 1.2mm x 50mm, 1.6mm x 50mm, 2.4mm x 50mm,...

Bearing & Bush Retainer 10g LIQUI MOLY - 3806

Liqui Moly

Solvent-free, high-strength, low viscosity, oil-resistant and anaerobe (without oxygen) hardening glue on a Dimethacrylatester basis. Service temperature: -60°C to +150°C. Intended use For attaching coaxial assembly parts such as bearings,...

Copper Ease Anti Seize Grease Comma CE500G 500g

Comma

Comma CE500G Copper Ease is an anti-seize compound which is primarily used on brake discs. The formula has been developed to have an extreme temperature tolerance between -40°C to 1150°C. The protective coating will not wash or burn off and will...

Granville Black RTV Silicone Sealant Instant Gasket

GRANVILLE

Granville RTV Silicone Sealant Multipurpose black sealant 310ml tube Withstand temperatures from -60°C to +250°C Ideal for general automotive and workshop use. Suitable for use with standard silicone sealant applicator guns.

HYLOMAR Universal Blue Instant Gasket Sealant 100G Tube - RTC3347

HYLOMAR

A new 100g tube of Hylomar universal blue instant gasket sealant.A non hardening sealant, resistant to fuel, oil and antifreeze.Use with paper gaskets or on bare metal surfaces to ensure a perfect seal.

Thread Lock Screw Retainer High Strength 10g LIQUI MOLY - 3803

Liqui Moly

Prevents unwanted screw loosening. Resistant against vibration loosening. With wide service temperature range: 60 °C to 150 °C. Hardens quickly and reliably. Can be used on oiled surfaces. Seals the screws, prevents leaks. Good chemical...