Suspension

Replacement bush kit for both Upper and Lower pin mounts. This fits the Pin/Threaded bar mount on the shock absorber, which both the upper and lower on the front and lower on the rear. Kit Contents: 2 x Bushes 2 x Washers 1 x Nyloc nut Compatibility: ...

Terrafirma zinc plated steel heavy duty rear coil spring retaining plates. Coil springs can part company from their mounts when long travel shocks are fitted. Heavy duty spring retaining plates are used to secure the coil spring to the axle to make sure...

Terrafirma zinc plated steel heavy duty front coil spring retaining plates including nuts and bolts. Coil springs can part company from their mounts when long travel shocks are fitted. Heavy duty spring retaining plates are used to secure the coil spring...

One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber...

The original front shock turret securing rings are somewhat frail and the threaded studs are often not long enough to adequately secure heavy duty or tubular front shock turrets. Terrafirma front shock turret securing rings are much stronger and use...

Replacement bush kit for both Upper mount on the TF124 and TF130. This fits the Circular bush upper mount on the shock absorber. This is a single kit for one shock absorber and contains a bush. Compatibility: Land Rover Defender Land Rover Discovery...

  Heavy load rear coil springs are designed to provide 2 of lift on heavily laden vehicles for commercial and expedition use. We usually recommend the TF023V for most Defender 90s however the TF027 is particularly good for people who want more...

Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Features: Interactive, multi-stacked...

A standard height, single galvanised front shock absorber turret. Suitable for the following Land Rover models:DefenderDiscovery 1Range Rover Classic

They're a direct replacement for those fitted to the vehicle in the factory. Specifications: Product Type: Poly Bush Kit Vehicle Placement: Front Equivalent to Land Rover part number: ANR3410 Compatibility: Land Rover Defender Land Rover...

  Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer...

  Suspension upper A-frame bracket complete with OEM ball joint. Makes changing the ball joint a much easier job. Features: With OEM ball joint assembly - ANR1799G Fitting kit - DA1129KIT Compatibility: Land Rover Defender Land Rover Discovery 1...