ProEvo+ Land Rover Steering and Suspension Parts
Professional evolution of quality
What Is ProEvo+?
ProEvo+ is a premium aftermarket range of steering, conventional suspension and air-suspension components for Land Rover and Jaguar vehicles.
The range is intended to provide a dependable alternative where owners want a high-quality replacement without paying the full cost of a Genuine Land Rover component.
Products are selected to preserve the comfort, responsiveness, stability and handling expected from modern Land Rover vehicles while helping to reduce the overall cost of repair and ownership.
Added reassurance
Backed by a 24-Month Guarantee
ProEvo+ steering and suspension products are guaranteed for 24 months or 24,000 miles, equivalent to approximately 38,000 kilometres, whichever limit is reached first.
Warranty cover applies subject to the applicable terms, correct vehicle fitment and professional installation where required.
Related suspension faults, leaks, damaged wiring, contaminated air systems, worn bushes or incorrect installation can cause a replacement component to fail prematurely and should be investigated when carrying out a repair.
Explore the ProEvo+ Range
ProEvo+ covers individual components throughout the steering and suspension system, allowing the actual fault to be repaired rather than automatically replacing an unnecessarily large assembly.
Air-Suspension Struts
Complete air-spring and shock-absorber assemblies for selected Discovery, Range Rover and Range Rover Sport models.
Air Springs
Replacement air bellows and spring units for vehicles where the damper or complete strut does not need replacing.
Shock Absorbers
Vehicle-specific dampers for selected standard, continuously variable and performance suspension applications.
Compressors
Replacement compressor pumps and complete assemblies for restoring pressure to supported air-suspension systems.
Height Sensors
Electronic suspension-height sensors for monitoring the position of the vehicle and informing the suspension control system.
Valve Blocks
Front, rear and reservoir valve blocks for directing compressed air through supported suspension systems.
Suspension Arms
Front and rear upper and lower suspension arms for a growing range of Land Rover vehicle applications.
Bushes, Links and Ball Joints
Individual suspension bushes, stabiliser links and ball joints for repairing worn steering and suspension systems.
Restore ride height and control
Complete Air-Suspension Strut Assemblies
A complete air-suspension strut combines the air spring and shock absorber into one ready-to-fit assembly.
Replacing the complete unit can be appropriate when the air spring is leaking, the damper is worn or both parts have reached the end of their useful life.
Exact specification is critical. Vehicles may use different left- and right-hand units, adaptive dampers, active stabilisation or alternative suspension configurations, even within the same model range.
Repair the Complete Air-Suspension System
An air-suspension warning does not automatically mean that the air strut has failed. The system relies on several components working together, and proper diagnosis can prevent unnecessary replacement parts.
Air-Suspension Compressors
The compressor creates and replenishes the pressure required to raise and maintain the vehicle.
Suspension Height Sensors
Height sensors report the position of each corner of the vehicle to the suspension control module.
Air-Suspension Valve Blocks
Valve blocks control the flow of compressed air between the compressor, reservoir and suspension units.
Diagnose the Fault Before Ordering
Air-suspension systems are interconnected. Replacing the component named in a fault code without further testing may not correct the underlying problem.
Check for Air Leaks
Leaking air springs, pipes or connections can make a healthy compressor run excessively.
Read the Fault Codes
Suitable Land Rover diagnostic equipment can help identify stored suspension and communication faults.
Inspect the Wiring
Damaged wiring, corroded plugs and poor connections can imitate a failed sensor or valve.
Check System Pressure
A slow rise or pressure fault can be caused by a worn compressor, leakage, blockage or valve problem.
Inspect the Dryer and Filter
Moisture, debris and restricted intake systems can reduce compressor performance and service life.
Calibrate Where Required
Replacing sensors or suspension components may require diagnostic calibration or fault clearing.
More than air suspension
Suspension Arms, Bushes and Steering Components
ProEvo+ also supplies conventional steering and suspension components for a growing range of Land Rover models.
Worn suspension-arm bushes and ball joints can cause knocking, uneven tyre wear, vague steering, braking instability and difficulty maintaining correct wheel alignment.
Complete arm assemblies can provide a practical repair where the fitted bushes or ball joints are worn, but the correct side, position and suspension specification must be confirmed before ordering.
Common Suspension Fault Symptoms
These symptoms can have several possible causes and should be investigated before replacement parts are selected.
ProEvo+ Parts for Popular Land Rover Models
Product availability varies by model, year, suspension system, side and vehicle specification.
Check the Exact Specification Before Ordering
Left or Right Side
Some struts, shock absorbers, sensors and suspension arms are handed and cannot be fitted on either side.
Suspension Type
Adaptive damping, active stabilisation, air suspension and standard suspension can require different components.
Model Year and VIN
Components can change during a vehicle’s production run, even where the model name remains unchanged.
Existing Component
Compare the fitted part number, connections, brackets and design wherever several versions may have been used.
Why Buy ProEvo+ from JGS4x4?
Land Rover Specialists
JGS4x4 has supplied parts and accessories for Land Rover vehicles to UK customers since 2002.
Extensive Range
Shop air-suspension, steering and conventional suspension components through one specialist range.
Regular Supplier Deliveries
Products not held in our warehouse may be available through regular deliveries from the UK supplier.
UK Mail-Order Service
Order securely online for delivery to eligible addresses throughout the UK.
ProEvo+ Frequently Asked Questions
Is ProEvo+ a Genuine Land Rover product?
No. ProEvo+ is a premium aftermarket steering and suspension brand. Genuine Land Rover products are supplied in Land Rover packaging and will be clearly identified separately.
What does built to OE specification mean?
It means the component is designed to match the appropriate dimensions, operation and performance requirements for its stated vehicle application. It does not mean the product is Genuine Land Rover or necessarily made by the original supplier.
How long is the ProEvo+ warranty?
ProEvo+ steering and suspension products are covered for 24 months or 24,000 miles, approximately 38,000 kilometres, whichever limit is reached first, subject to the applicable warranty terms.
Should I replace both suspension struts together?
Shock absorbers and struts are often replaced in axle pairs to maintain balanced damping, especially when both units are the same age and mileage. The appropriate repair depends on the condition of the vehicle and the failed component.
Will a new compressor repair a sinking vehicle?
Not necessarily. A vehicle that sinks when parked often has an air leak, faulty valve block or leaking strut. A compressor may then become worn because it has been compensating for the leak.
Does an air-suspension repair require diagnostic equipment?
Some repairs require fault codes to be cleared, the system to be depressurised or suspension heights to be calibrated. Requirements vary by vehicle and the component replaced.
Are ProEvo+ suspension arms supplied with bushes?
Many complete arms include their fitted bushes and, where applicable, a ball joint. Contents vary, so check the photographs and complete product description before ordering.
How do I confirm which part fits my Land Rover?
Check the model, year, engine, side, suspension specification and any VIN restrictions on the JGS4x4 product page. Compare the fitted part number where possible and contact us before ordering if the application remains uncertain.
Restore Your Land Rover with ProEvo+
Browse ProEvo+ air-suspension struts, shock absorbers, compressors, sensors, valve blocks and conventional suspension parts.
Shop All ProEvo+ Products Contact JGS4x4