How to Replace a Discovery 2 Front Wheel Bearing

How to Replace a Discovery 2 Front Wheel Bearing

To install a TAY100060 Discovery 2 front wheel bearing hub you will need to follow these steps:

  • Remove the wheel and brake caliper from the front axle of your Discovery 2.
  • Remove the brake disc and the ABS sensor from the hub assembly.
  • Remove the four bolts that secure the hub assembly to the steering knuckle and pull the hub assembly out.
  • Clean the steering knuckle and apply some anti-seize compound to the mating surface.
  • Install the new hub assembly, part number TAY100060 with the ABS sensor facing the correct direction and tighten the bolts to the specified torque.
  • Reconnect the ABS sensor and reinstall the brake disc, caliper, and wheel.
  • Repeat the process for the other side if needed.

https://www.jgs4x4.co.uk/discovery-2-front-wheel-b...

16th Nov 2023 JGS4x4

Recent Posts

JGS4x4 is an independent supplier of parts and accessories. We are not affiliated with or endorsed by Jaguar Land Rover Limited. All references to vehicle models are used for identification and compatibility purposes only.