Steering, Hub & Suspension

Used to check and adjust the alignment of the lasers on Model No. GA70 Four-Wheel Laser Aligner. This unit will allow workshops to check and adjust in-house. Laser heads secure to the rig and rest on the bobbins that contact the vehicle’s wheel rim...

Package includes: Model No. - Description GA70 - 4-Wheel Laser Wheel Aligner GA70CR - Calibration Rig for GA70Bore: Ø22mmDisc Size: Ø115mmGrit: 40Nett Weight: 0.075kg

Fast, simple and accurate alignment of both front and rear wheels. Optimises vehicle performance and set-up after installation or modification of steering and suspension components. Simple and fast to use, it is ideal for the busy professional workshop...

Optical system uses low radiation laser beam to indicate toe-in or toe-out. Single leg configuration and reversible contact probes allow on-ramp use. Works on most cars and light commercials with rim diameters from 200mm(8") to 600mm(23.5"). Powered by 2...

Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with 4-wheel Laser Aligners such as Sealey Model GA70. Self-retaining and centring using a spring-loaded mechanism...

Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination. Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement, and one for adjusting kingpin inclination...

Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles. Large adjuster knob for convenient zeroing of bubble during castor angle measurement. Graduated from -6° to +6°. Supplied in storage case.Bore:...

Use in conjunction with Caster Kingpin Gauge Sets for accurate castor and kingpin alignment. Also measures toe-in/out and full lock angles. Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements...

Steel framed foot pump with two Ø54 x 116mm barrels. Digital gauge calibrated in psi, bar and kPa ranging from 0-73psi and 0-5bar. Large LCD screen with easy-to-read display. Fitted with 670mm flexible hose length with locking connector. Fitted with...

Steel framed foot pump with Ø54 x 116mm barrel. Digital gauge calibrated in psi, bar and kPa ranging from 0-140psi and 0-10bar. Large LCD screen with easy-to-read display. Fitted with 685mm flexible hose length with locking connector. Anti-slip rubber...

High power, steel framed foot pump with two Ø44 x 110mm aluminium barrels. Ø75mm dial type pressure gauge calibrated in psi and bar and ranges from 0-160psi and 0-10bar. Suitable for Presta and Schrader valve. Fitted with 650mm flexible pressure...

Steel framed foot pump with Ø50 x 120mm steel barrel. Dial type pressure gauge with rotating bezel. Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar. Fitted with 610mm flexible pressure hose with locking connector. Supplied with...